Print

Electric hoist leaves large distillery in high spirits

Published:  05 September, 2024

A large producer of spirits is now benefiting from a turnkey package of three Italkrane ATEX-rated electric chain hoists supplied by Hoist & Winch. Operational within a new extension of the Scotland-based distillery, the 2-ton swl (safe working load) hoists raise and lower sealed vessel lids and baskets containing raw materials used in the production of gin.

Among the challenges of this demanding project was a restriction in the overall height of the new building due to local planning laws. In turn, only limited headroom is available for lifting operations over the vessels. Critical for the application, therefore, was the specification by Hoist & Winch of Italkrane YY series electric chain hoists featuring a low-headroom design. The ATEX specification of the hoists is necessary due to the vapours and fumes produced in the manufacture of alcohol-based products.

Italkrane YY series electric chain hoists feature an Ex d electrical enclosure design to contain any explosions and stop flames, sparks and hot gases from escaping. Full anti-spark features are in place for all components subject to sliding friction, including the brass trolley wheels. Also present is a non-sparking load hook, brass anti-tip device and polycarbonate pendant control ensuring explosion protection up to Zone 1 II B T4 classification.

The power supply to each hoist unit is via a festoon cable track system complete with sliding trolleys and support arms clipped to the top flange of the hoist runway beam. Each hoist unit also features an Italkrane heavy-duty geared top/bottom limit switch and friction-type slipping clutch overload protection device.

“Although we provide a full spectrum of lifting equipment services, Hoist & Winch is particularly at home supplying equipment for demanding industries, including the distillery sector,” explains Hoist & Winch Director Andy Allen. “We have extensive knowledge of this industry, where our quality of service and flexible approach ensure the highest levels of customer satisfaction.”

Click here for the full release

t: 08450 171126

e: sales@hoistandwinch.co.uk

w: www.hoistandwinch.co.uk

Related Articles

  • Electric hoist leaves large distillery in high spirits  

    A large producer of spirits is now benefiting from a turnkey package of three Italkrane ATEX-rated electric chain hoists supplied by Hoist & Winch. Operational within a new extension of the Scotland-based distillery, the 2-ton swl (safe working load) hoists raise and lower sealed vessel lids and baskets containing raw materials used in the production of gin.

  • Explosion proof lifting for hazardous environments 

    Lifting equipment specialist, Konecranes, has announced it has launched its range of EX C-series electric chain hoists, engineered for explosion proof lifting in hazardous environments. The models are suitable for a wide range of industrial applications where gases, flammable substances, dust and other ignition sources create the potential for explosions. The EX C-series electric chain hoist has been designed and tested specifically to fulfil ATEX and IECEx requirements for use in Zone 1, 2 and 21 explosive environments.

  • Smart CM protects production process  

    Muntons Malt, one of the UK’s largest producers of malted barley has chosen the Smart Condition Monitoring (SCM) system from Mitsubishi Electric to protect fans and motors vital to its large-scale and sensitive production process. PWE reports.

  • Pneumatic versus electric hoists 

    When considering a new investment in hoist technology, a full comparison between pneumatic and electric hoists can pay real dividends. In short, pneumatic hoists from J D NEUHAUS (JDN) offer numerous advantages over their electric counterparts. The company says in areas such as duty cycle, variable speed control, weatherproofing, installation and operation, maintenance, robustness, investment costs, lifetime costs and of course safety, a JDN pneumatic hoist really makes a difference.

  • Bespoke electric winch  

    HOIST & WINCH says its recent supply of a bespoke electric-powered winch to a UK building products company is allowing the safe and smooth lifting and lowering of a large telescopic export chute that loads heavy-goods vehicles (HGVs) with a media byproduct from the customer’s production process. Importantly, raising and descending takes place in a level and precise position thanks to adjustable turn-buckle jacking screws.

Sign up for the PWE newsletter

Latest issue

To view a digital copy of the latest issue of Plant & Works Engineering, click here.

View the past issue archive here.

To subscribe to the journal please click here.

Poll

"How is your manufacturing business preparing for a net Zero target?"






Twitter