Premix burners up to 3MW
Published: 05 September, 2022
RIELLO RX premix packaged burners are available in outputs up to 3MW, offering NOx levels of less than 40mg/kWh, with high turndown ratios of up to 8:1, across a wide range of models.
Riello says its RX burners feature an exclusive design that includes a patented woven wire gauze ‘sock’ covering the combustion head cylinder. Gas and combustion air are mixed upstream of the combustion head and then pass through precision-located ports and the gauze ‘sock’ to ignite on the external surface of the combustion head. This arrangement enables a very compact flame with a diameter directly related to the burner firing rate, ensuring precise heat control and optimum efficiency at all loads.
The high turndown makes RX burners ideal for systems with variable heat loads where low NOx levels are also required.
Click here for the full release
t: 01480 432144
e: info@rielloburners.co.uk
When a food processing plant in North Yorkshire found that oil coolers were running too hot, and heat exchangers used for pasteurising food were struggling to keep up, the cause was quickly identified as being scale and corrosion debris in the water side of several plate heat exchangers.
WEGER AIR SOLUTIONS UK reports it has expanded its product range with the introduction of 5 models of heat pump to air heat recovery units. All of the units are ‘stand alone’ and only need electrical power, so are said to be ideal for applications where hot water, chilled water and gas are not available.
