Hydra-Cell T80 Series Pumps meet API 674
Published: 23 July, 2014
After an in-depth evaluation of the Hydra-Cell T-Series pumps range, WANNER INTERNATIONAL is now able to offer three Hydra-Cell pump models that comply with API 674, 3rd Edition December 2010, the standard that covers the minimum requirements for reciprocating positive displacement pumps for use in service in the petroleum, chemical, and gas industries.
Thought to be the only pumps with multiple diaphragms within a single head, that comply with the Standard, Hydra-Cell T-Series pumps have a true seal-less design, eliminating clean-up costs related to leaking seals or packing while protecting operators and the environment from contact with potentially dangerous leaking fluids.
Hydra-Cell T-Series pumps are reported to offer greatly reduced Life-cycle Costs when compared to plunger pumps, which have a far greater maintenance requirement and single head diaphragm pumps, which are more expensive and less energy efficient.
The high-pressure model, Hydra-Cell T8030-S, is rated at 290 bar pressure and 5.0 m3/hr (83.3 l/m) under continuous use conditions, with a flow rate of 5.9 m3/hr (98.3 l/m) during intermittent use.
Two variants of the medium pressure pump are currently offered. The Hydra-Cell T8045-K is rated at 172 bar pressure and 8.6 m3/hr (143.3 l/m) while the Hydra-Cell T8045-M is rated at 206 bar pressure and 7.4 m3/hr (123.3 l/m), both under continuous use conditions. For intermittent use the flow rate of both models may be increased by some 20% while still meeting the life expectancy requirements of the API standard.
To date, diaphragm pumps meeting API 674 have been cumbersome with separate pump heads and a large footprint. The Hydra-Cell T-Series now combines the seal-less benefits of these pumps with the compact dimensions of a conventional triplex plunger pump.
For further information please visit: www.hydra-cell.eu
WANNER INTERNATIONAL reports it will display its full range of Hydra-Cell diaphragm pumps at Achema 2015 on Stand L53 Hall 8 with the theme: “Hydra-Cell seal-less pump technology… It’s different”. The company says the unique and advantageous differences will be highlighted in product displays, working demonstrations and cutaway pump models.
WANNER INTERNATIONAL reports it has extended its range of oil coolers with the introduction of two new models, designed for use in potentially harsh and corrosive environments, including marine applications.
WANNER INTERNATIONAL has announced it will display its full range of Hydra-Cell diaphragm Process and Metering pumps at Achema 2018 on Stand D51 with the theme: “Hydra-Cell seal-less pump technology… It’s different” and says the unique and advantageous differences will be highlighted with product displays, working demonstrations and cutaway pump models.
