Online condition monitoring prevents unplanned machine downtime
Published: 18 September, 2020
By installing online condition monitoring devices on 58 critical drives, Schaeffler’s European Distribution Centre has seen a range of benefits, including the prevention of unplanned downtime, reduced maintenance costs and increased machine availability. PWE reports.
Inside Schaeffler’s European Distribution Centre (EDC Central) in Kitzingen, Germany, there are seven automated storage and retrieval systems, which continuously handle loads in various directions from storage racks with a height of around 38.5 metres. The bearings in the drives of these storage and retrieval systems are subjected to severe loads during operation. Any unplanned downtime of the storage and retrieval systems due to bearing damage can affect the entire supply chain. In the worst case scenario, this may result in delayed deliveries of customer orders. The logistics centre was therefore looking for a Predictive Maintenance solution.
Solution
The EDC Central relies on intelligent maintenance solutions developed in-house for monitoring the automated storage and retrieval systems. Of the approximately 3000 drives at Kitzingen, 58 of the most critical are monitored using the SmartCheck condition monitoring solution.
51 of the SmartChecks are installed on spiral conveyors and lifting stations, where they monitor vibration, temperature and speed of the bearings. The SmartChecks are connected to the Schaeffler network, allowing local visualisation in the control room at Kitzingen.
Seven SmartChecks are installed on the drives of the storage and retrieval systems. After an operating period of around 18 months, one of the SmartChecks detected an irregular upward trend. The subsequent visual inspection carried out by local maintenance staff confirmed that grease had escaped from the track roller bearing. Due to the early detection of this irregularity, the site was able to schedule and perform the bearing replacement in good time and therefore prevent any unplanned downtime.
The online monitoring solution is an important tool for Kitzingen in eliminating unplanned downtime and malfunctions during operation. Other advantages include:
• Prevention of costs resulting from production downtime.
• Prevention of subsequent damage to the drive.
• Low purchasing costs for the monitoring system.
• Reduced maintenance costs.
• Increased machine availability.
• Enhanced reliability through a self-reporting system.
Oliver Massa, intralogistics portfolio manager at Schaeffler commented on the benefits of the monitoring solution: "Bearing damage was detected at an early stage thanks to the SmartCheck. The team was able to carry out the four-hour maintenance work outside of our regular operating hours. Production was therefore safeguarded and subsequent damage to the drive was prevented. With predictive maintenance, we can save costs of up to 70,000 euros every year."
***************
Schaeffler’s European Distribution Centre (EDC Central) in Kitzingen, Germany, opened in June 2018, and covers a total area of 148,000 square metres, employing around 200 people. The site has two storage racks with a height of 38.5 metres, which provides space for 28,000 Euro pallets and 95,000 containers. Equipped with an in-floor, 2km long conveyor system and state-of-the-art conveying technology, the centre also provides 20 ramps for up to 85 trucks per day.
*****************
![](/images//4282.photo.4.jpg)