Print

FNT 16 neutral disconnect terminal

Published:  13 February, 2019

CONTA-CLIP has announced it has expanded its range of single-level push-in installation terminals, adding the FNT 16 neutral disconnect terminal for wire cross sections between 2.5 mm² and 25 mm² (up to 16 mm² with wire-end ferrules). The company says the push-in connection system allows for safe connection of wires without tools. When a solid wire or ferrule is inserted, the pressure spring opens automatically and establishes a secure contact.

Standard screwdrivers can be used to connect and disconnect flexible wires without ferrules. The disconnect terminal integrates a receptacle for the 10x3-mm neutral busbar. There is no need for an additional fixing plate. The neutral busbar is securely connected via a screw-less slider.

t: +49 . 5257 . 9833 - 0

e: christian.quade@conta-clip.de

w: www.conta-clip.com

Click here for the full unedited version of the release as provided by the company

Related Articles

  • Fast-mount wire holders 

    CONTA-CLIP has further enhanced its range of usability aids for VK cabling ducts, adding fast-mount wire holders. The wire holders can be clipped into the cabling ducts without tools. The company says they make it easier to neatly arrange conductors and keep signal and power lines clearly apart and they also simplify adding new wiring, since existing cables stay put and do not come lose and entangled when the cover is removed and last but not least, users will find it easier to clean their well-organised cabling duct of dust.

  • Direct Modbus connection  

    CONTA-CLIP says its GSM-PRO2 series communication modules feature a Modbus RTU (RS485) interface that enables easy data exchange with other controllers. The modules operate in slave mode and can, for example, provide a PLC with added GSM functionality via an easy plug connection to the RS485 port directly on the C-type mounting rail.

  • TKS transformer terminal  

    CONTA-CLIP reports it has added a transformer terminal for wire cross-sections up to 16 mm² to its TKS series. The terminals are used to adapt coil ends to screw connections to implement power supply of specific devices or machinery in a larger system. The company says their hinged cover elements open wide and can be fixed in place when opened to enable comfortable, time-saving soldering of the coil ends.

  • 4G-enabled I/O communication modules 

    Introducing GSM-PRO2 and GSM-PRO2E communication modules, CONTA-CLIP has announced economic 4G wireless remote control and maintenance solutions for decentralised applications. If no 4G network is available, the modules automatically fall back on 3G or 2G networks.

  • Customisation of cabling ducts 

    CONTA-CLIP says it provides all necessary tools for customising its UL- and VDE-certified VK series cabling ducts. The company says the VK-S cutter allows for shortening up to 125 mm wide standard or halogen-free cabling ducts to the required length. Cuts are clean, without burrs, and with the exact required angle.

Sign up for the PWE newsletter

Latest issue

To view a digital copy of the latest issue of Plant & Works Engineering, click here.

View the past issue archive here.

To subscribe to the journal please click here.

Poll

"How is your manufacturing business preparing for a net Zero target?"






Twitter

Events Diary

Click here to see all 19 events

Click here to let us know about an event!