Related Articles

• Heating efficiency served up on a plate 

  Plate heat exchangers instantaneously generate hot water at the required temperature with flow rates measured in hundreds of litres per minute. Paul Sands, director of Stokvis Energy Systems, reports.

• Making the best choice for your application! 

  Richard Oxley, vacuum product manager for Atlas Copco UK, discusses which type of industrial vacuum pump is right for your application to assist end users in selecting the best type of equipment for their application.

• Heat regeneration should be key consideration 

  Many industrial processes require energy, but only a portion of that energy input is used for each operation such as pasteurisation or evaporation. Unused energy is wasted, often passing to the environment as hot gas or liquid. However, by using heat exchangers, it is possible to recapture most of this untapped energy through waste heat regeneration. Matt Hale* explains further.

• Industrial chiller refrigerants 

  Richard Payne* takes a look at industrial chiller refrigerants

• Waste heat recovery in industrial applications 

  You will be amazed to know how waste heat recovery units can be used in so many industrial applications says Matthew Crewe, managing director of Green’s (pictured).