Print

Investigation into the Deragger II's Energy Savings

Published:  13 May, 2016

The Deragger II product has been successfully installed in multiple sites
throughout Scottish Water to eliminate pump blockages caused by wet wipes and
other non-dispersible products. No thorough tracking of the measurable benefits
other than blockage reduction have been taken. The purpose of this paper is to
demonstrate the other measurable benefits of the product.

Background


The Deragger II was first installed back in April 2011 at Ross point SPS in Fife.
Since then around 100 other sites within Scottish water have been retrofitted
successfully with the Deragger II. The product has eliminated the blockages at all
of these sites saving huge amounts on reactive callouts to unblock pumps.
In Early 2014 Deragger II's were installed on a trial basis and jointly between
Scottish Water Energy Team and ID Systems at this and another 4 sites. This was
with the intention of establishing their effectiveness as a means of reducing
energy, along with preventing pumps from choking. The Deragger II's were set up
to monitor and data log only. No blockage prevention was turned on at this point.


The Site


Annfield SPS is the main pumping station in Leith, Edinburgh. The effluent is
pumped from the wet well to Seafield STW. There is a very flat sewer collection
network due to the low-lying drainage network at close to sea water level. The flat
sewer is conducive to the settlement of rag in the sewer followed by wash in.
Furthermore, SW customers in the area are at risk of flooding should the sewer
become backed up due to the low lying nature of their basements. The station
consists of 2 off 100kW Flygt 3312 N Pumps fitted in a dry well setup delivering
around 260L/s of flow. The Pumps are controlled in a duty standby configuration
from an MCC housed above the dry well. The pumps are started via Ralspeed Soft
Starters. The flow was measured via an ABB Magmaster Magnetic Flowmeter. This
outputs a 4-20mA signal that correlates to L/s. This 4-20mA signal is wired to
telemetry and logged on open enterprise.

For complete paper please download

File: Annfield SPSv2.pdf (490k)

Related Articles

  • SEEPEX back mixing technology increases sludge throughout  

    SEEPEX engineered solution encompassing progressive cavity pumps for dewatered sludge back mixing has increased sludge throughput at Anglian Water’s Cotton Valley cake import facility by 50%, enabling the site to generate more biogas, and delivering significant savings in logistics and cake storage costs.

  • Extended Product Directive – a pump is not a light bulb 

    The aim of the EU Eco-Design Directive is to improve the environmental impact of energy-intensive products by optimising their design. Since pumps require a lot of energy, some inevitably fall within scope of this directive. Better design could significantly reduce their energy consumption. However, considerably more can be achieved if the pump is not viewed in isolation, but as part of the overall system along with its electric motor and controller.

  • Choosing the correct pump 

    Lesley Eaton, business development and marketing manager, SEEPEX, looks at how progressive cavity pumps can overcome the toughest processing challenges.

  • Drives pump up the savings for water supplier 

    The UK’s largest water-only supply company Affinity Water, implemented a project with one of its framework contractors for replacement of the existing vertical turbine pumps with submersible pump sets manufactured by Bedford Pumps. PWE reports.

  • Energy-reducing sludge solution 

    Progressive cavity pump specialist SEEPEX has developed a new system to improve dewatered sludge handling, enabling long distance transfer with reduced operational costs by using a combination of PC pump technology and dense-phase conveying.

Sign up for the PWE newsletter

Latest issue

To view a digital copy of the latest issue of Plant & Works Engineering, click here.

View the past issue archive here.

To subscribe to the journal please click here.

Poll

"How is your manufacturing business preparing for a net Zero target?"






Twitter

Events Diary

Click here to see all 18 events

Click here to let us know about an event!